
Case study · Norfolk
Pumping station oil and water removalNorfolk
Residual engine oil drained from two pumping sets and water removed from two raised steel tanks in the plant room of a fen drainage pumping station near King’s Lynn.
The starting point
A pumping station being refurbished.
Fen pumping stations keep the land around King’s Lynn drained, and their plant rooms hold large pumps, engines and service tanks.
During work on this station by a civil engineering contractor, two items of equipment still held residual engine oil and two elevated steel tanks still held water. Both had to be emptied before the refurbishment could go further.
The two liquids needed different handling: the oil is hazardous waste, the water had to be drawn off without spreading contamination around the plant room.

The work
What we did.
Plan the drain points
We looked at the equipment drain plugs and whether existing pipes and valves could be used.
Drain the oil
Residual engine oil was drained from both items of equipment and collected for disposal.
Empty the tanks
Water was pumped out of the two raised steel tanks.
Access
A plant room with tall windows and heavy machinery.
The vehicle could be parked close to the building, which kept hose runs short.
Working indoors around large pumps meant protecting floors and keeping drained oil contained at every step.
Using existing valves where possible avoided cutting into pipework that the contractor might want to keep.


The result
Plant ready for the next stage.
The equipment was drained of engine oil and the raised tanks were emptied, leaving the plant room ready for the contractor’s next stage of work.
The same site also needed red diesel residues collected; see the related case study below.
Project questions
Norfolk project questions.
Do you work at pumping stations and utility sites?
Yes. We drain oil, empty tanks and collect waste fuel at pumping stations, water treatment works and similar plant.
Can you drain engine oil from large machinery?
Yes. We use the equipment drain points or existing valves where possible and collect the oil as hazardous waste.
Do you remove water from tanks as well as oil?
Yes. We empty water, oil and mixed contents from tanks before refurbishment, inspection or removal.
Do you work for civil engineering contractors?
Yes. Much of our work is for main contractors who need tanks and plant made safe as part of a larger project.
More tank work in Norfolk
Client typeLand drainage pumping station
Same work forWater and drainage utilities, hospitals, leisure centres and pools
This project was near King’s Lynn, Norfolk. The Norfolk page covers towns, typical sites and the environmental rules there, and the East of England page shows the wider region.
Planning similar work?
Tell us about your tank.
Send a few photos, the tank size if you know it and the postcode, and we will come back with a method, a fixed price and a date.





