
Case study · Hitchin
Steel tank removalHitchin
A 2,500-litre steel tank removed from a walled enclosure at engineering premises in Hitchin, after part of the brick wall had been taken down for access.
The starting point
A tank boxed in by brick.
The steel tank sat inside a brick enclosure built around it, with no gap big enough to get it out.
Before our visit the client had taken down part of the wall. A forklift was available on site and our vehicle could park close to the tank.
Those three facts shaped the plan: how the tank would come out, how it would be handled and how far it had to travel.

The work
What we did.
Make it safe
Any remaining fuel was pumped out before the tank was moved.
Through the opening
The tank was brought out through the gap in the brick wall.
Load and go
It was loaded onto our vehicle and taken away for disposal.

The result
Enclosure empty.
The tank was removed through the opening and taken off site, leaving the enclosure clear.
The quantity of fuel collected is in the transfer record and is not quoted here.
Project questions
Hitchin project questions.
What if the tank is walled in?
A section of wall usually has to come out, or the tank can be cut up inside the enclosure after it has been cleaned.
Can you use the forklift on our site?
Where it is safe and suitable, yes. It often makes lifting easier.
Do you remove tanks from engineering and industrial premises?
Yes. Steel and plastic tanks of all sizes are removed from industrial sites across England.
More tank work in Hertfordshire
Client typeEngineering company premises
Same work forWarehouses, builders’ merchants, food and drink producers
This project was in Hitchin, Hertfordshire. The Hertfordshire page covers towns, typical sites and the environmental rules there, and the East of England page shows the wider region.
Planning similar work?
Tell us about your tank.
Send a few photos, the tank size if you know it and the postcode, and we will come back with a method, a fixed price and a date.


