Old diesel standby generator on a concrete plinth inside a plant room

Case study · Harrogate

Generator and fuel tank removalHarrogate

A standby generator moved out of its plant room and its wall-mounted fuel tank removed at an industrial site near Harrogate, working alongside the site’s electrical contractor.

near Harrogate · North YorkshireStandby generator + day tank
GeneratorMoved out of plant room
Fuel tankWall-mounted, removed
DisconnectedBy the electrician first
ClearedPlinth and wall

The starting point

An old generator coming out.

The site’s electrical contractor needed the old standby generator moved out and its fuel tank taken away.

The generator stood on a concrete plinth inside a small plant room, and its fuel tank was mounted on brackets high on the outside wall.

The generator had to be electrically disconnected before our team arrived, so the work was timed around the electrician.

Green fuel tank mounted on steel brackets high on an outside wall
The wall-mounted fuel tank.

The work

What we did.

01

Isolation first

The electrical contractor disconnected the generator before we started.

02

Generator out

The generator was moved out of the plant room through the existing door.

03

Tank down

The wall-mounted fuel tank was taken off its brackets and removed.

Access

A busy industrial yard.

The plant room opened onto a working yard, so equipment and vehicles had to fit around site traffic.

We measured the doorway, plinth and route before the day so the move could be planned without surprises.

With the old set and tank gone, the plant room and wall were left clear for the replacement.

Open plant room door with the generator visible inside
The plant room entrance.

Project photographs

On site.

Empty concrete plinth after a generator was removed

The result

Plant room cleared.

The generator plinth and the wall where the tank had hung were left clear.

The space was ready for whatever the site plans next.

Project questions

Harrogate project questions.

Can you remove a generator and its fuel tank together?

Yes. We remove the fuel, take out the tank and move the generator, working with your electrician for the isolation.

Who disconnects the generator?

A qualified electrician isolates it before we start. We can work alongside your own contractor.

Can you remove tanks mounted high on a wall?

Yes. Wall-mounted day tanks are drained and lowered safely before removal.

Do you work at data centres and hospitals?

Yes. Generator fuel systems at critical sites are a regular part of our work.

Project location

More tank work in North Yorkshire

  1. Areas We Work
  2. Yorkshire and the Humber
  3. North Yorkshire

Client typeIndustrial site, standby generator works

Same work forData centres, hospitals, telecoms sites

This project was near Harrogate, North Yorkshire. The North Yorkshire page covers towns, typical sites and the environmental rules there, and the Yorkshire and the Humber page shows the wider region.

Planning similar work?

Tell us about your tank.

Send a few photos, the tank size if you know it and the postcode, and we will come back with a method, a fixed price and a date.

Call 24/7 Get a Quote