Diesel tanker and blue dispensing tank at the Leeds project

Case study · Leeds, West Yorkshire

27,500-Litre Diesel Tank Relocation in Leeds

Fuel transfer and relocation of a commercial diesel dispensing tank in Leeds.

Leeds, West YorkshireCommercial tank relocation
27,500L
Tank capacity
Diesel
Stored fuel
Relocation
Project scope
Completed
Tank moved · fuel returned
Project overview

Move the tank.
Manage the fuel.

A commercial customer in Leeds needed a 27,500-litre diesel dispenser tank relocated. The work involved the fuel as well as the tank: diesel had to be removed before the move and returned afterwards.

The agreed approach brought fuel handling and crane-assisted relocation into one sequence. The work plan specified a rigid tanker, IBC containers as required and a HIAB crane lorry for the tank move.

The relocation was completed, and the diesel was returned to the tank following the move. The 27,500-litre figure describes the tank’s capacity; it does not represent a measured quantity of diesel transferred.

The agreed method

Fuel handling before the lift.

The initial scope allowed for a rigid tanker to remove diesel, with remaining contents transferred into IBC containers as required. Planning the temporary holding arrangements alongside the move meant the fuel-handling stages were considered before the tank was repositioned.

The fuel-handling and lifting arrangements were planned together, including temporary holding capacity and the sequence of vehicle attendance. This allowed diesel removal, the tank move and the return transfer to be coordinated.

Work sequence

Transfer. Relocate. Return.

01

Fuel removed

Diesel was removed from the dispenser tank before the tank was moved. The handling plan provided for tanker capacity and temporary IBC storage as required.

02

Tank relocated

The diesel dispensing tank was moved to its new position. A HIAB crane lorry was the relocation method specified in the agreed work plan.

03

Diesel returned

Following the relocation, diesel was pumped back into the tank. This completed the fuel-handling sequence around the move.

Scope and coordination

A clear boundary for electrical work.

Electrical work was the client’s responsibility. Britteco’s agreed scope covered fuel handling and tank relocation.

For another site planning a similar move, the tank’s connections, proposed position, vehicle access and temporary fuel arrangements should be discussed together. A tank’s rated capacity alone is not enough to establish its contents or the equipment needed for a particular relocation.

Completed result

Tank relocated.
Diesel returned.

The diesel dispensing tank was relocated, and the diesel was returned to the tank following the move.

This Leeds project illustrates the distinction between moving an existing commercial fuel tank and removing a redundant one for disposal. Here, the tank was retained and repositioned, with fuel transfer supporting that change.

Photo record

The tank and fuel-handling setup.

Photographs from the Leeds project showing the dispensing tank, tanker, transfer hoses and IBC containers.

Project questions

Diesel tank relocation FAQ.

What did this Leeds tank relocation involve?

A 27,500-litre diesel dispensing tank was moved, with fuel removed before the relocation and returned to the tank afterwards. The agreed plan specified a HIAB crane lorry for the move.

Was 27,500 litres of diesel transferred?

27,500 litres is the tank’s nominal capacity. Tank capacity and the quantity of diesel handled are separate figures; the fuel quantity should not be inferred from the size of the tank.

How was temporary fuel storage planned?

The work plan combined a rigid tanker with IBC containers for diesel handling as required. Temporary storage, transfer equipment and the sequence of the move were considered together.

Did Britteco carry out the electrical work?

Electrical work was allocated to the client. Britteco’s agreed work covered the tank relocation and fuel handling.

What information is useful when planning a commercial diesel tank move?

Share the tank capacity and dimensions if known, an estimate of its contents, photographs of the existing and proposed positions, access for vehicles and lifting equipment, and details of connected systems. These help define the relocation scope.

Project location

More tank work in West Yorkshire

  1. Areas We Work
  2. Yorkshire and the Humber
  3. West Yorkshire
  4. Leeds

This project was in Leeds, West Yorkshire. The West Yorkshire page covers the towns, typical sites and environmental rules there, and the Yorkshire and the Humber page shows the other counties we cover nearby.

Discuss your project

Planning a commercial
fuel tank move?

Send photographs of the tank, access route and proposed position, together with its capacity and estimated contents. We can discuss the fuel transfer and relocation requirements for your site.

Call 24/7 Get a Quote