AI-generated illustration of Tower Bridge and the River Thames
Home / Areas We Work / London

London · Oil tank removal, cleaning & replacement

Oil tank removal & cleaning in London

Commercial oil tank removal, diesel and fuel tank cleaning, inspections, installation and replacement across London. Britteco also provides tank decommissioning and diesel fuel polishing for commercial and industrial fuel storage systems.

Discuss your London projectCall 0800 677 1155

Site-specific RAMS · Planned works & emergency enquiries · UK-wide team

Completed in London

Oil tank replacement in London.
9,200 litres, one coordinated project.

At a London commercial site, Britteco replaced an ageing 9,200-litre oil tank and installed a new two-inch underground fuel line to the customer’s pump house.

A Hiab lift brought the replacement tank over a hedgerow. Buried joints were sleeved and placed beneath inspection chambers, and the completed pipework was pressure tested to 0.5 bar before fuel was returned.

Read the full London case study →

9,200LTank replaced
3 daysOn site
2Alarms fitted
Hiab crane lifting the replacement fuel tank over a hedgerow at the London project
Real Britteco project: tank replacement and underground fuel line, London.

Choose the service you need

Oil tank removal, cleaning & inspections in London

Whether you are maintaining an operational fuel system or removing redundant equipment, start with the service that fits your site. Our team will confirm the scope and practical requirements for your London address.

Oil tank removal & disposal

Remove redundant above-ground or underground fuel tanks, with cold cutting where appropriate to the assessed site and method.

Explore oil & fuel tank removal →

Diesel & fuel tank cleaning

Our industrial tank cleaning services address sludge, water and contamination in diesel and oil storage tanks. Discuss cleaning for maintenance or before decommissioning.

Explore commercial fuel tank cleaning →

Tank decommissioning

Plan how to take a fuel tank out of service. Removal or filling in place depends on access, tank condition and site assessment.

Explore tank decommissioning →

Diesel fuel polishing

Treat water and particulate contamination in stored fuel through filtration, including fuel used for standby generators.

Explore diesel fuel polishing →

Also available: underground tank removal, foam and void filling and waste fuel disposal.

London & surrounding areas

Access matters.
So does keeping work organised.

For sites in Greater London or the surrounding South East, send your postcode so we can confirm project arrangements. The tank specification is only part of the brief. Tell us about vehicle access, lifting space, the route between the tank and the building, and any operating hours or shutdown restrictions.

Our London replacement project involved a lift over a hedgerow, an existing bund and new underground pipework. The published case study shows how those details shaped the work.

Send your site postcode, photographs, approximate tank capacity and a short description of the work. We can then discuss the appropriate assessment and next steps.

From enquiry to handover

  1. Understand the site. Review the tank, contents, access and intended outcome.
  2. Agree the method. Plan the work and prepare site-specific risk assessments and method statements.
  3. Coordinate the work. Agree access, fuel handling and any interfaces with your team or contractors.
  4. Complete and document. Provide the relevant completion records, with testing and waste documentation appropriate to the agreed scope.

About the Britteco team →

Before you book

London project questions

Do you carry out commercial tank work in London?

Yes. Britteco serves London as part of its UK-wide service. Our published London case study documents a 9,200-litre tank replacement and new underground fuel line. Send your postcode and project details so we can confirm the arrangements for your site.

Can you work around restricted access?

Access is assessed before the method is agreed. On our London replacement project, a Hiab crane lifted the tank over a hedgerow. Your site may need a different approach depending on the route, lifting space and surrounding structures.

Can you replace the fuel line as well as the tank?

Yes. The London case study includes a new two-inch underground fuel line to a pump house, inspection chambers over buried joints and pressure testing. We will establish the pipework scope for your installation during assessment.

How much does commercial oil tank removal in London cost?

The quotation depends on tank size and condition, remaining contents, access, removal or lifting requirements and the work needed to reconnect or decommission the system. Send photographs and your postcode to request a site-specific quotation.

Is fuel polishing the same as tank cleaning?

No. Fuel polishing filters stored fuel to address water and particulate contamination. Tank cleaning addresses deposits and contamination inside the tank. The appropriate service depends on the fuel and tank condition; some projects need both. Read about fuel polishing or discuss your system with our team.

Can you inspect a fuel tank before I decide to replace it?

Britteco provides fuel and oil tank inspections to assess tank condition and help identify maintenance or replacement needs. Tell us the tank type, capacity and location so we can discuss the survey or testing required.

Do you install new commercial fuel tanks in London?

Britteco provides commercial fuel tank installation and replacement. The scope can include fuel lines, controls and commissioning, depending on the site. Our published London project documents a replacement tank and a new underground fuel line. Discuss tank installation requirements, including capacity, base, access and operational restrictions.

What information should I send with my enquiry?

Include the site postcode, tank capacity if known, fuel type, photographs of the tank and access route, and whether you need cleaning, removal, replacement or advice. Tell us about any preferred dates and operational restrictions.

Do you have a London office?

London is an area we serve. Britteco’s listed business locations are Banbury and Harrogate. View our contact details or call to discuss attendance at your London site.

Tell us what needs doing

Let’s plan your London project.

Share your postcode, tank details and photographs. Our team will help establish the next step for your commercial or industrial site.

Request a quotation0800 677 1155

For urgent fuel tank enquiries, call our 24/7 line.

Call 24/7 Get a Quote